From d98f46ce647846b0aa30b2e16a30fd4e152a1bf5 Mon Sep 17 00:00:00 2001
From: Carlos Maiolino <cem@kernel.org>
Date: Thu, 10 Jul 2025 22:55:07 +0200
Subject: Add new code

Signed-off-by: Carlos Maiolino <cem@toxiclabs.cc>
---
 .../AccelStepper/examples/Quickstop/Quickstop.pde  | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Arduino/libraries/AccelStepper/examples/Quickstop/Quickstop.pde

(limited to 'Arduino/libraries/AccelStepper/examples/Quickstop/Quickstop.pde')

diff --git a/Arduino/libraries/AccelStepper/examples/Quickstop/Quickstop.pde b/Arduino/libraries/AccelStepper/examples/Quickstop/Quickstop.pde
new file mode 100644
index 0000000..e6cfd44
--- /dev/null
+++ b/Arduino/libraries/AccelStepper/examples/Quickstop/Quickstop.pde
@@ -0,0 +1,40 @@
+// Quickstop.pde
+// -*- mode: C++ -*-
+//
+// Check stop handling.
+// Calls stop() while the stepper is travelling at full speed, causing
+// the stepper to stop as quickly as possible, within the constraints of the
+// current acceleration.
+//
+// Copyright (C) 2012 Mike McCauley
+// $Id:  $
+
+#include <AccelStepper.h>
+
+// Define a stepper and the pins it will use
+AccelStepper stepper; // Defaults to AccelStepper::FULL4WIRE (4 pins) on 2, 3, 4, 5
+
+void setup()
+{  
+  stepper.setMaxSpeed(150);
+  stepper.setAcceleration(100);
+}
+
+void loop()
+{    
+  stepper.moveTo(500);
+  while (stepper.currentPosition() != 300) // Full speed up to 300
+    stepper.run();
+  stepper.stop(); // Stop as fast as possible: sets new target
+  stepper.runToPosition(); 
+  // Now stopped after quickstop
+
+  // Now go backwards
+  stepper.moveTo(-500);
+  while (stepper.currentPosition() != 0) // Full speed basck to 0
+    stepper.run();
+  stepper.stop(); // Stop as fast as possible: sets new target
+  stepper.runToPosition(); 
+  // Now stopped after quickstop
+
+}
-- 
cgit v1.2.3