From d98f46ce647846b0aa30b2e16a30fd4e152a1bf5 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Thu, 10 Jul 2025 22:55:07 +0200 Subject: Add new code Signed-off-by: Carlos Maiolino --- msp340/Break/driverlib/MSP430FR5xx_6xx/framctl.h | 303 +++++++++++++++++++++++ 1 file changed, 303 insertions(+) create mode 100755 msp340/Break/driverlib/MSP430FR5xx_6xx/framctl.h (limited to 'msp340/Break/driverlib/MSP430FR5xx_6xx/framctl.h') diff --git a/msp340/Break/driverlib/MSP430FR5xx_6xx/framctl.h b/msp340/Break/driverlib/MSP430FR5xx_6xx/framctl.h new file mode 100755 index 0000000..5677c2b --- /dev/null +++ b/msp340/Break/driverlib/MSP430FR5xx_6xx/framctl.h @@ -0,0 +1,303 @@ +/* --COPYRIGHT--,BSD + * Copyright (c) 2014, Texas Instruments Incorporated + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * * Neither the name of Texas Instruments Incorporated nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * --/COPYRIGHT--*/ +//***************************************************************************** +// +// framctl.h - Driver for the FRAMCTL Module. +// +//***************************************************************************** + +#ifndef __MSP430WARE_FRAMCTL_H__ +#define __MSP430WARE_FRAMCTL_H__ + +#include "inc/hw_memmap.h" + +#ifdef __MSP430_HAS_FRAM__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// The following are values that can be passed to the interruptMask parameter +// for functions: FRAMCtl_enableInterrupt(), and FRAMCtl_disableInterrupt(). +// +//***************************************************************************** +#define FRAMCTL_PUC_ON_UNCORRECTABLE_BIT UBDRSTEN +#define FRAMCTL_UNCORRECTABLE_BIT_INTERRUPT UBDIE +#define FRAMCTL_CORRECTABLE_BIT_INTERRUPT CBDIE + +//***************************************************************************** +// +// The following are values that can be passed to the interruptFlagMask +// parameter for functions: FRAMCtl_getInterruptStatus() as well as returned by +// the FRAMCtl_getInterruptStatus() function. +// +//***************************************************************************** +#define FRAMCTL_ACCESS_TIME_ERROR_FLAG ACCTEIFG +#define FRAMCTL_UNCORRECTABLE_BIT_FLAG UBDIFG +#define FRAMCTL_CORRECTABLE_BIT_FLAG CBDIFG + +//***************************************************************************** +// +// The following are values that can be passed to the waitState parameter for +// functions: FRAMCtl_configureWaitStateControl(). +// +//***************************************************************************** +#define FRAMCTL_ACCESS_TIME_CYCLES_0 NWAITS_0 +#define FRAMCTL_ACCESS_TIME_CYCLES_1 NWAITS_1 +#define FRAMCTL_ACCESS_TIME_CYCLES_2 NWAITS_2 +#define FRAMCTL_ACCESS_TIME_CYCLES_3 NWAITS_3 +#define FRAMCTL_ACCESS_TIME_CYCLES_4 NWAITS_4 +#define FRAMCTL_ACCESS_TIME_CYCLES_5 NWAITS_5 +#define FRAMCTL_ACCESS_TIME_CYCLES_6 NWAITS_6 +#define FRAMCTL_ACCESS_TIME_CYCLES_7 NWAITS_7 + +//***************************************************************************** +// +// The following are values that can be passed to the delayStatus parameter for +// functions: FRAMCtl_delayPowerUpFromLPM(). +// +//***************************************************************************** +#define FRAMCTL_DELAY_FROM_LPM_ENABLE 0x00 +#define FRAMCTL_DELAY_FROM_LPM_DISABLE 0x02 + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \brief Write data into the fram memory in byte format. +//! +//! \param dataPtr is the pointer to the data to be written +//! \param framPtr is the pointer into which to write the data +//! \param numberOfBytes is the number of bytes to be written +//! +//! \return None +// +//***************************************************************************** +extern void FRAMCtl_write8(uint8_t *dataPtr, + uint8_t *framPtr, + uint16_t numberOfBytes); + +//***************************************************************************** +// +//! \brief Write data into the fram memory in word format. +//! +//! \param dataPtr is the pointer to the data to be written +//! \param framPtr is the pointer into which to write the data +//! \param numberOfWords is the number of words to be written +//! +//! \return None +// +//***************************************************************************** +extern void FRAMCtl_write16(uint16_t *dataPtr, + uint16_t *framPtr, + uint16_t numberOfWords); + +//***************************************************************************** +// +//! \brief Write data into the fram memory in long format, pass by reference +//! +//! \param dataPtr is the pointer to the data to be written +//! \param framPtr is the pointer into which to write the data +//! \param count is the number of 32 bit words to be written +//! +//! \return None +// +//***************************************************************************** +extern void FRAMCtl_write32(uint32_t *dataPtr, + uint32_t *framPtr, + uint16_t count); + +//***************************************************************************** +// +//! \brief Write data into the fram memory in long format, pass by value +//! +//! \param value is the value to written to FRAMCTL memory +//! \param framPtr is the pointer into which to write the data +//! \param count is the number of 32 bit addresses to fill +//! +//! \return None +// +//***************************************************************************** +extern void FRAMCtl_fillMemory32(uint32_t value, + uint32_t *framPtr, + uint16_t count); + +//***************************************************************************** +// +//! \brief Enables selected FRAMCtl interrupt sources. +//! +//! Enables the indicated FRAMCtl interrupt sources. Only the sources that are +//! enabled can be reflected to the processor interrupt; disabled sources have +//! no effect on the processor. Does not clear interrupt flags. +//! +//! \param interruptMask is the bit mask of the memory buffer interrupt sources +//! to be disabled. +//! Mask value is the logical OR of any of the following: +//! - \b FRAMCTL_PUC_ON_UNCORRECTABLE_BIT - Enable PUC reset if FRAMCtl +//! uncorrectable bit error detected. +//! - \b FRAMCTL_UNCORRECTABLE_BIT_INTERRUPT - Interrupts when an +//! uncorrectable bit error is detected. +//! - \b FRAMCTL_CORRECTABLE_BIT_INTERRUPT - Interrupts when a +//! correctable bit error is detected. +//! +//! Modified bits of \b GCCTL0 register and bits of \b FRCTL0 register. +//! +//! \return None +// +//***************************************************************************** +extern void FRAMCtl_enableInterrupt(uint8_t interruptMask); + +//***************************************************************************** +// +//! \brief Returns the status of the selected FRAMCtl interrupt flags. +//! +//! \param interruptFlagMask is a bit mask of the interrupt flags status to be +//! returned. +//! Mask value is the logical OR of any of the following: +//! - \b FRAMCTL_ACCESS_TIME_ERROR_FLAG - Interrupt flag is set if a +//! wrong setting for NPRECHG and NACCESS is set and FRAMCtl access +//! time is not hold. +//! - \b FRAMCTL_UNCORRECTABLE_BIT_FLAG - Interrupt flag is set if an +//! uncorrectable bit error has been detected in the FRAMCtl memory +//! error detection logic. +//! - \b FRAMCTL_CORRECTABLE_BIT_FLAG - Interrupt flag is set if a +//! correctable bit error has been detected and corrected in the +//! FRAMCtl memory error detection logic. +//! +//! \return Logical OR of any of the following: +//! - \b FRAMCtl_ACCESS_TIME_ERROR_FLAG Interrupt flag is set if a +//! wrong setting for NPRECHG and NACCESS is set and FRAMCtl access +//! time is not hold. +//! - \b FRAMCtl_UNCORRECTABLE_BIT_FLAG Interrupt flag is set if an +//! uncorrectable bit error has been detected in the FRAMCtl memory +//! error detection logic. +//! - \b FRAMCtl_CORRECTABLE_BIT_FLAG Interrupt flag is set if a +//! correctable bit error has been detected and corrected in the +//! FRAMCtl memory error detection logic. +//! \n indicating the status of the masked flags +// +//***************************************************************************** +extern uint8_t FRAMCtl_getInterruptStatus(uint16_t interruptFlagMask); + +//***************************************************************************** +// +//! \brief Disables selected FRAMCtl interrupt sources. +//! +//! Disables the indicated FRAMCtl interrupt sources. Only the sources that +//! are enabled can be reflected to the processor interrupt; disabled sources +//! have no effect on the processor. +//! +//! \param interruptMask is the bit mask of the memory buffer interrupt sources +//! to be disabled. +//! Mask value is the logical OR of any of the following: +//! - \b FRAMCTL_PUC_ON_UNCORRECTABLE_BIT - Enable PUC reset if FRAMCtl +//! uncorrectable bit error detected. +//! - \b FRAMCTL_UNCORRECTABLE_BIT_INTERRUPT - Interrupts when an +//! uncorrectable bit error is detected. +//! - \b FRAMCTL_CORRECTABLE_BIT_INTERRUPT - Interrupts when a +//! correctable bit error is detected. +//! +//! \return None +// +//***************************************************************************** +extern void FRAMCtl_disableInterrupt(uint16_t interruptMask); + +//***************************************************************************** +// +//! \brief Configures the access time of the FRAMCtl module +//! +//! Configures the access time of the FRAMCtl module. +//! +//! \param waitState defines the number of CPU cycles required for access time +//! defined in the datasheet +//! Valid values are: +//! - \b FRAMCTL_ACCESS_TIME_CYCLES_0 +//! - \b FRAMCTL_ACCESS_TIME_CYCLES_1 +//! - \b FRAMCTL_ACCESS_TIME_CYCLES_2 +//! - \b FRAMCTL_ACCESS_TIME_CYCLES_3 +//! - \b FRAMCTL_ACCESS_TIME_CYCLES_4 +//! - \b FRAMCTL_ACCESS_TIME_CYCLES_5 +//! - \b FRAMCTL_ACCESS_TIME_CYCLES_6 +//! - \b FRAMCTL_ACCESS_TIME_CYCLES_7 +//! +//! Modified bits are \b NWAITS of \b GCCTL0 register. +//! +//! \return None +// +//***************************************************************************** +extern void FRAMCtl_configureWaitStateControl(uint8_t waitState); + +//***************************************************************************** +// +//! \brief Configures when the FRAMCtl module will power up after LPM exit +//! +//! Configures when the FRAMCtl module will power up after LPM exit. The module +//! can either wait until the first FRAMCtl access to power up or power up +//! immediately after leaving LPM. If FRAMCtl power is disabled, a memory +//! access will automatically insert wait states to ensure sufficient timing +//! for the FRAMCtl power-up and access. +//! +//! \param delayStatus chooses if FRAMCTL should power up instantly with LPM +//! exit or to wait until first FRAMCTL access after LPM exit +//! Valid values are: +//! - \b FRAMCTL_DELAY_FROM_LPM_ENABLE +//! - \b FRAMCTL_DELAY_FROM_LPM_DISABLE +//! +//! \return None +// +//***************************************************************************** +extern void FRAMCtl_delayPowerUpFromLPM(uint8_t delayStatus); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif +#endif // __MSP430WARE_FRAMCTL_H__ -- cgit v1.2.3