Add new code

Signed-off-by: Carlos Maiolino <[email protected]>

1 files changed, 86 insertions, 0 deletions

diff --git a/Arduino/libraries/AccelStepper/src/MultiStepper.cpp b/Arduino/libraries/AccelStepper/src/MultiStepper.cpp
new file mode 100644
index 0000000..6a22e11
--- /dev/null
+++ b/Arduino/libraries/AccelStepper/src/MultiStepper.cpp
@@ -0,0 +1,86 @@
+// MultiStepper.cpp
+//
+// Copyright (C) 2015 Mike McCauley
+// $Id: MultiStepper.cpp,v 1.3 2020/04/20 00:15:03 mikem Exp mikem $
+
+#include "MultiStepper.h"
+#include "AccelStepper.h"
+
+MultiStepper::MultiStepper()
+    : _num_steppers(0)
+{
+}
+
+boolean MultiStepper::addStepper(AccelStepper& stepper)
+{
+    if (_num_steppers >= MULTISTEPPER_MAX_STEPPERS)
+	return false; // No room for more
+    _steppers[_num_steppers++] = &stepper;
+    return true;
+}
+
+void MultiStepper::moveTo(long absolute[])
+{
+    // First find the stepper that will take the longest time to move
+    float longestTime = 0.0;
+
+    uint8_t i;
+    for (i = 0; i < _num_steppers; i++)
+    {
+	long thisDistance = absolute[i] - _steppers[i]->currentPosition();
+	float thisTime = abs(thisDistance) / _steppers[i]->maxSpeed();
+
+	if (thisTime > longestTime)
+	    longestTime = thisTime;
+    }
+
+    if (longestTime > 0.0)
+    {
+	// Now work out a new max speed for each stepper so they will all 
+	// arrived at the same time of longestTime
+	for (i = 0; i < _num_steppers; i++)
+	{
+	    long thisDistance = absolute[i] - _steppers[i]->currentPosition();
+	    float thisSpeed = thisDistance / longestTime;
+	    _steppers[i]->moveTo(absolute[i]); // New target position (resets speed)
+	    _steppers[i]->setSpeed(thisSpeed); // New speed
+	}
+    }
+}
+
+// Returns true if any motor is still running to the target position.
+boolean MultiStepper::run()
+{
+    uint8_t i;
+    boolean ret = false;
+    for (i = 0; i < _num_steppers; i++)
+    {
+	if ( _steppers[i]->distanceToGo() != 0)
+	{
+	    _steppers[i]->runSpeed();
+	    ret = true;
+	}
+	// Caution: it has een reported that if any motor is used with acceleration outside of
+	// MultiStepper, this code is necessary, you get 
+	// strange results where it moves in the wrong direction for a while then 
+	// slams back the correct way.
+#if 0
+	else
+	{
+	    // Need to call this to clear _stepInterval, _speed and _n 
+	    otherwise future calls will fail.
+		_steppers[i]->setCurrentPosition(_steppers[i]->currentPosition());
+	}
+#endif
+	
+    }
+    return ret;
+}
+
+// Blocks until all steppers reach their target position and are stopped
+void    MultiStepper::runSpeedToPosition()
+{ 
+    while (run())
+	;
+}
+