Add new code

Signed-off-by: Carlos Maiolino <[email protected]>

1 files changed, 1017 insertions, 0 deletions

diff --git a/msp340/Break/driverlib/MSP430FR5xx_6xx/gpio.h b/msp340/Break/driverlib/MSP430FR5xx_6xx/gpio.h
new file mode 100755
index 0000000..319c5b6
--- /dev/null
+++ b/msp340/Break/driverlib/MSP430FR5xx_6xx/gpio.h
@@ -0,0 +1,1017 @@
+/* --COPYRIGHT--,BSD
+ * Copyright (c) 2014, Texas Instruments Incorporated
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * *  Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * *  Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * *  Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * --/COPYRIGHT--*/
+//*****************************************************************************
+//
+// gpio.h - Driver for the GPIO Module.
+//
+//*****************************************************************************
+
+#ifndef __MSP430WARE_GPIO_H__
+#define __MSP430WARE_GPIO_H__
+
+#include "inc/hw_memmap.h"
+
+#if defined(__MSP430_HAS_PORT1_R__) || defined(__MSP430_HAS_PORT2_R__) || \
+    defined(__MSP430_HAS_PORTA_R__)
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the selectedPort parameter
+// for functions: GPIO_setAsOutputPin(), GPIO_setAsInputPin(),
+// GPIO_setAsPeripheralModuleFunctionOutputPin(),
+// GPIO_setAsPeripheralModuleFunctionInputPin(), GPIO_setOutputHighOnPin(),
+// GPIO_setOutputLowOnPin(), GPIO_toggleOutputOnPin(),
+// GPIO_setAsInputPinWithPullDownResistor(),
+// GPIO_setAsInputPinWithPullUpResistor(), GPIO_getInputPinValue(),
+// GPIO_selectInterruptEdge(), GPIO_enableInterrupt(), GPIO_disableInterrupt(),
+// GPIO_getInterruptStatus(), and GPIO_clearInterrupt().
+//
+//*****************************************************************************
+#define GPIO_PORT_P1                                                          1
+#define GPIO_PORT_P2                                                          2
+#define GPIO_PORT_P3                                                          3
+#define GPIO_PORT_P4                                                          4
+#define GPIO_PORT_P5                                                          5
+#define GPIO_PORT_P6                                                          6
+#define GPIO_PORT_P7                                                          7
+#define GPIO_PORT_P8                                                          8
+#define GPIO_PORT_P9                                                          9
+#define GPIO_PORT_P10                                                        10
+#define GPIO_PORT_P11                                                        11
+#define GPIO_PORT_PA                                                          1
+#define GPIO_PORT_PB                                                          3
+#define GPIO_PORT_PC                                                          5
+#define GPIO_PORT_PD                                                          7
+#define GPIO_PORT_PE                                                          9
+#define GPIO_PORT_PF                                                         11
+#define GPIO_PORT_PJ                                                         13
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the selectedPins parameter
+// for functions: GPIO_setAsOutputPin(), GPIO_setAsInputPin(),
+// GPIO_setAsPeripheralModuleFunctionOutputPin(),
+// GPIO_setAsPeripheralModuleFunctionInputPin(), GPIO_setOutputHighOnPin(),
+// GPIO_setOutputLowOnPin(), GPIO_toggleOutputOnPin(),
+// GPIO_setAsInputPinWithPullDownResistor(),
+// GPIO_setAsInputPinWithPullUpResistor(), GPIO_getInputPinValue(),
+// GPIO_enableInterrupt(), GPIO_disableInterrupt(), GPIO_getInterruptStatus(),
+// GPIO_clearInterrupt(), and GPIO_selectInterruptEdge() as well as returned by
+// the GPIO_getInterruptStatus() function.
+//
+//*****************************************************************************
+#define GPIO_PIN0                                                      (0x0001)
+#define GPIO_PIN1                                                      (0x0002)
+#define GPIO_PIN2                                                      (0x0004)
+#define GPIO_PIN3                                                      (0x0008)
+#define GPIO_PIN4                                                      (0x0010)
+#define GPIO_PIN5                                                      (0x0020)
+#define GPIO_PIN6                                                      (0x0040)
+#define GPIO_PIN7                                                      (0x0080)
+#define GPIO_PIN8                                                      (0x0100)
+#define GPIO_PIN9                                                      (0x0200)
+#define GPIO_PIN10                                                     (0x0400)
+#define GPIO_PIN11                                                     (0x0800)
+#define GPIO_PIN12                                                     (0x1000)
+#define GPIO_PIN13                                                     (0x2000)
+#define GPIO_PIN14                                                     (0x4000)
+#define GPIO_PIN15                                                     (0x8000)
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the mode parameter for
+// functions: GPIO_setAsPeripheralModuleFunctionOutputPin(), and
+// GPIO_setAsPeripheralModuleFunctionInputPin().
+//
+//*****************************************************************************
+#define GPIO_PRIMARY_MODULE_FUNCTION                                     (0x01)
+#define GPIO_SECONDARY_MODULE_FUNCTION                                   (0x02)
+#define GPIO_TERNARY_MODULE_FUNCTION                                     (0x03)
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the edgeSelect parameter for
+// functions: GPIO_selectInterruptEdge().
+//
+//*****************************************************************************
+#define GPIO_HIGH_TO_LOW_TRANSITION                                      (0x01)
+#define GPIO_LOW_TO_HIGH_TRANSITION                                      (0x00)
+
+//*****************************************************************************
+//
+// The following are values that can be passed toThe following are values that
+// can be returned by the GPIO_getInputPinValue() function.
+//
+//*****************************************************************************
+#define GPIO_INPUT_PIN_HIGH                                              (0x01)
+#define GPIO_INPUT_PIN_LOW                                               (0x00)
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+//! \brief This function configures the selected Pin as output pin
+//!
+//! This function selected pins on a selected port as output pins.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxDIR register and bits of \b PxSEL register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_setAsOutputPin(uint8_t selectedPort,
+                                uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function configures the selected Pin as input pin
+//!
+//! This function selected pins on a selected port as input pins.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxDIR register, bits of \b PxREN register and bits of
+//! \b PxSEL register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_setAsInputPin(uint8_t selectedPort,
+                               uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function configures the peripheral module function in the
+//! output direction for the selected pin.
+//!
+//! This function configures the peripheral module function in the output
+//! direction for the selected pin for either primary, secondary or ternary
+//! module function modes. Note that MSP430F5xx/6xx family doesn't support
+//! these function modes.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//! \param mode is the specified mode that the pin should be configured for the
+//!        module function.
+//!        Valid values are:
+//!        - \b GPIO_PRIMARY_MODULE_FUNCTION
+//!        - \b GPIO_SECONDARY_MODULE_FUNCTION
+//!        - \b GPIO_TERNARY_MODULE_FUNCTION
+//!
+//! Modified bits of \b PxDIR register and bits of \b PxSEL register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_setAsPeripheralModuleFunctionOutputPin(uint8_t selectedPort,
+                                                        uint16_t selectedPins,
+                                                        uint8_t mode);
+
+//*****************************************************************************
+//
+//! \brief This function configures the peripheral module function in the input
+//! direction for the selected pin.
+//!
+//! This function configures the peripheral module function in the input
+//! direction for the selected pin for either primary, secondary or ternary
+//! module function modes. Note that MSP430F5xx/6xx family doesn't support
+//! these function modes.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//! \param mode is the specified mode that the pin should be configured for the
+//!        module function.
+//!        Valid values are:
+//!        - \b GPIO_PRIMARY_MODULE_FUNCTION
+//!        - \b GPIO_SECONDARY_MODULE_FUNCTION
+//!        - \b GPIO_TERNARY_MODULE_FUNCTION
+//!
+//! Modified bits of \b PxDIR register and bits of \b PxSEL register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_setAsPeripheralModuleFunctionInputPin(uint8_t selectedPort,
+                                                       uint16_t selectedPins,
+                                                       uint8_t mode);
+
+//*****************************************************************************
+//
+//! \brief This function sets output HIGH on the selected Pin
+//!
+//! This function sets output HIGH on the selected port's pin.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxOUT register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_setOutputHighOnPin(uint8_t selectedPort,
+                                    uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function sets output LOW on the selected Pin
+//!
+//! This function sets output LOW on the selected port's pin.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxOUT register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_setOutputLowOnPin(uint8_t selectedPort,
+                                   uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function toggles the output on the selected Pin
+//!
+//! This function toggles the output on the selected port's pin.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxOUT register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_toggleOutputOnPin(uint8_t selectedPort,
+                                   uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function sets the selected Pin in input Mode with Pull Down
+//! resistor
+//!
+//! This function sets the selected Pin in input Mode with Pull Down resistor.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxDIR register, bits of \b PxOUT register and bits of
+//! \b PxREN register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_setAsInputPinWithPullDownResistor(uint8_t selectedPort,
+                                                   uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function sets the selected Pin in input Mode with Pull Up
+//! resistor
+//!
+//! This function sets the selected Pin in input Mode with Pull Up resistor.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxDIR register, bits of \b PxOUT register and bits of
+//! \b PxREN register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_setAsInputPinWithPullUpResistor(uint8_t selectedPort,
+                                                 uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function gets the input value on the selected pin
+//!
+//! This function gets the input value on the selected pin.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! \return One of the following:
+//!         - \b GPIO_INPUT_PIN_HIGH
+//!         - \b GPIO_INPUT_PIN_LOW
+//!         \n indicating the status of the pin
+//
+//*****************************************************************************
+extern uint8_t GPIO_getInputPinValue(uint8_t selectedPort,
+                                     uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function enables the port interrupt on the selected pin
+//!
+//! This function enables the port interrupt on the selected pin. Please refer
+//! to family user's guide for available ports with interrupt capability.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxIE register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_enableInterrupt(uint8_t selectedPort,
+                                 uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function disables the port interrupt on the selected pin
+//!
+//! This function disables the port interrupt on the selected pin. Please refer
+//! to family user's guide for available ports with interrupt capability.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxIE register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_disableInterrupt(uint8_t selectedPort,
+                                  uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function gets the interrupt status of the selected pin
+//!
+//! This function gets the interrupt status of the selected pin. Please refer
+//! to family user's guide for available ports with interrupt capability.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! \return Logical OR of any of the following:
+//!         - \b GPIO_PIN0
+//!         - \b GPIO_PIN1
+//!         - \b GPIO_PIN2
+//!         - \b GPIO_PIN3
+//!         - \b GPIO_PIN4
+//!         - \b GPIO_PIN5
+//!         - \b GPIO_PIN6
+//!         - \b GPIO_PIN7
+//!         - \b GPIO_PIN8
+//!         - \b GPIO_PIN9
+//!         - \b GPIO_PIN10
+//!         - \b GPIO_PIN11
+//!         - \b GPIO_PIN12
+//!         - \b GPIO_PIN13
+//!         - \b GPIO_PIN14
+//!         - \b GPIO_PIN15
+//!         \n indicating the interrupt status of the selected pins [Default:
+//!         0]
+//
+//*****************************************************************************
+extern uint16_t GPIO_getInterruptStatus(uint8_t selectedPort,
+                                        uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function clears the interrupt flag on the selected pin
+//!
+//! This function clears the interrupt flag on the selected pin. Please refer
+//! to family user's guide for available ports with interrupt capability.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//!
+//! Modified bits of \b PxIFG register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_clearInterrupt(uint8_t selectedPort,
+                                uint16_t selectedPins);
+
+//*****************************************************************************
+//
+//! \brief This function selects on what edge the port interrupt flag should be
+//! set for a transition
+//!
+//! This function selects on what edge the port interrupt flag should be set
+//! for a transition. Values for edgeSelect should be
+//! GPIO_LOW_TO_HIGH_TRANSITION or GPIO_HIGH_TO_LOW_TRANSITION. Please refer to
+//! family user's guide for available ports with interrupt capability.
+//!
+//! \param selectedPort is the selected port.
+//!        Valid values are:
+//!        - \b GPIO_PORT_P1
+//!        - \b GPIO_PORT_P2
+//!        - \b GPIO_PORT_P3
+//!        - \b GPIO_PORT_P4
+//!        - \b GPIO_PORT_P5
+//!        - \b GPIO_PORT_P6
+//!        - \b GPIO_PORT_P7
+//!        - \b GPIO_PORT_P8
+//!        - \b GPIO_PORT_P9
+//!        - \b GPIO_PORT_P10
+//!        - \b GPIO_PORT_P11
+//!        - \b GPIO_PORT_PA
+//!        - \b GPIO_PORT_PB
+//!        - \b GPIO_PORT_PC
+//!        - \b GPIO_PORT_PD
+//!        - \b GPIO_PORT_PE
+//!        - \b GPIO_PORT_PF
+//!        - \b GPIO_PORT_PJ
+//! \param selectedPins is the specified pin in the selected port.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b GPIO_PIN0
+//!        - \b GPIO_PIN1
+//!        - \b GPIO_PIN2
+//!        - \b GPIO_PIN3
+//!        - \b GPIO_PIN4
+//!        - \b GPIO_PIN5
+//!        - \b GPIO_PIN6
+//!        - \b GPIO_PIN7
+//!        - \b GPIO_PIN8
+//!        - \b GPIO_PIN9
+//!        - \b GPIO_PIN10
+//!        - \b GPIO_PIN11
+//!        - \b GPIO_PIN12
+//!        - \b GPIO_PIN13
+//!        - \b GPIO_PIN14
+//!        - \b GPIO_PIN15
+//! \param edgeSelect specifies what transition sets the interrupt flag
+//!        Valid values are:
+//!        - \b GPIO_HIGH_TO_LOW_TRANSITION
+//!        - \b GPIO_LOW_TO_HIGH_TRANSITION
+//!
+//! Modified bits of \b PxIES register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void GPIO_selectInterruptEdge(uint8_t selectedPort,
+                                     uint16_t selectedPins,
+                                     uint8_t edgeSelect);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+#endif // __MSP430WARE_GPIO_H__