Add new code

Signed-off-by: Carlos Maiolino <[email protected]>

1 files changed, 356 insertions, 0 deletions

diff --git a/msp340/Timers/driverlib/MSP430FR5xx_6xx/sysctl.h b/msp340/Timers/driverlib/MSP430FR5xx_6xx/sysctl.h
new file mode 100755
index 0000000..e274b2d
--- /dev/null
+++ b/msp340/Timers/driverlib/MSP430FR5xx_6xx/sysctl.h
@@ -0,0 +1,356 @@
+/* --COPYRIGHT--,BSD
+ * Copyright (c) 2014, Texas Instruments Incorporated
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * *  Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * *  Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * *  Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * --/COPYRIGHT--*/
+//*****************************************************************************
+//
+// sysctl.h - Driver for the SYSCTL Module.
+//
+//*****************************************************************************
+
+#ifndef __MSP430WARE_SYSCTL_H__
+#define __MSP430WARE_SYSCTL_H__
+
+#include "inc/hw_memmap.h"
+
+#ifdef __MSP430_HAS_SYS__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the mailboxSizeSelect
+// parameter for functions: SysCtl_initJTAGMailbox().
+//
+//*****************************************************************************
+#define SYSCTL_JTAGMBSIZE_16BIT                                    (!(JMBMODE))
+#define SYSCTL_JTAGMBSIZE_32BIT                                       (JMBMODE)
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the autoClearInboxFlagSelect
+// parameter for functions: SysCtl_initJTAGMailbox().
+//
+//*****************************************************************************
+#define SYSCTL_JTAGINBOX0AUTO_JTAGINBOX1AUTO       (!(JMBCLR0OFF + JMBCLR1OFF))
+#define SYSCTL_JTAGINBOX0AUTO_JTAGINBOX1SW                         (JMBCLR1OFF)
+#define SYSCTL_JTAGINBOX0SW_JTAGINBOX1AUTO                         (JMBCLR0OFF)
+#define SYSCTL_JTAGINBOX0SW_JTAGINBOX1SW              (JMBCLR0OFF + JMBCLR1OFF)
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the mailboxFlagMask parameter
+// for functions: SysCtl_getJTAGMailboxFlagStatus(), and
+// SysCtl_clearJTAGMailboxFlagStatus().
+//
+//*****************************************************************************
+#define SYSCTL_JTAGOUTBOX_FLAG0                                     (JMBOUT0FG)
+#define SYSCTL_JTAGOUTBOX_FLAG1                                     (JMBOUT1FG)
+#define SYSCTL_JTAGINBOX_FLAG0                                       (JMBIN0FG)
+#define SYSCTL_JTAGINBOX_FLAG1                                       (JMBIN1FG)
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the inboxSelect parameter for
+// functions: SysCtl_getJTAGInboxMessage16Bit().
+//
+//*****************************************************************************
+#define SYSCTL_JTAGINBOX_0                                                (0x0)
+#define SYSCTL_JTAGINBOX_1                                                (0x2)
+
+//*****************************************************************************
+//
+// The following are values that can be passed to the outboxSelect parameter
+// for functions: SysCtl_setJTAGOutgoingMessage16Bit().
+//
+//*****************************************************************************
+#define SYSCTL_JTAGOUTBOX_0                                               (0x0)
+#define SYSCTL_JTAGOUTBOX_1                                               (0x2)
+
+//*****************************************************************************
+//
+// The following are values that can be passed toThe following are values that
+// can be returned by the SysCtl_getBSLEntryIndication() function.
+//
+//*****************************************************************************
+#define SYSCTL_BSLENTRY_INDICATED                                         (0x1)
+#define SYSCTL_BSLENTRY_NOTINDICATED                                      (0x0)
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+//! \brief Sets the JTAG pins to be exclusively for JTAG until a BOR occurs.
+//!
+//! This function sets the JTAG pins to be exclusively used for the JTAG, and
+//! not to be shared with the GPIO pins. This setting can only be cleared when
+//! a BOR occurs.
+//!
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void SysCtl_enableDedicatedJTAGPins(void);
+
+//*****************************************************************************
+//
+//! \brief Returns the indication of a BSL entry sequence from the Spy-Bi-Wire.
+//!
+//! This function returns the indication of a BSL entry sequence from the Spy-
+//! Bi-Wire.
+//!
+//!
+//! \return One of the following:
+//!         - \b SysCtl_BSLENTRY_INDICATED
+//!         - \b SysCtl_BSLENTRY_NOTINDICATED
+//!         \n indicating if a BSL entry sequence was detected
+//
+//*****************************************************************************
+extern uint8_t SysCtl_getBSLEntryIndication(void);
+
+//*****************************************************************************
+//
+//! \brief Enables PMM Access Protection.
+//!
+//! This function enables the PMM Access Protection, which will lock any
+//! changes on the PMM control registers until a BOR occurs.
+//!
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void SysCtl_enablePMMAccessProtect(void);
+
+//*****************************************************************************
+//
+//! \brief Enables RAM-based Interrupt Vectors.
+//!
+//! This function enables RAM-base Interrupt Vectors, which means that
+//! interrupt vectors are generated with the end address at the top of RAM,
+//! instead of the top of the lower 64kB of flash.
+//!
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void SysCtl_enableRAMBasedInterruptVectors(void);
+
+//*****************************************************************************
+//
+//! \brief Disables RAM-based Interrupt Vectors.
+//!
+//! This function disables the interrupt vectors from being generated at the
+//! top of the RAM.
+//!
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void SysCtl_disableRAMBasedInterruptVectors(void);
+
+//*****************************************************************************
+//
+//! \brief Initializes JTAG Mailbox with selected properties.
+//!
+//! This function sets the specified settings for the JTAG Mailbox system. The
+//! settings that can be set are the size of the JTAG messages, and the auto-
+//! clearing of the inbox flags. If the inbox flags are set to auto-clear, then
+//! the inbox flags will be cleared upon reading of the inbox message buffer,
+//! otherwise they will have to be reset by software using the
+//! SYS_clearJTAGMailboxFlagStatus() function.
+//!
+//! \param mailboxSizeSelect is the size of the JTAG Mailboxes, whether 16- or
+//!        32-bits.
+//!        Valid values are:
+//!        - \b SYSCTL_JTAGMBSIZE_16BIT [Default] - the JTAG messages will take
+//!           up only one JTAG mailbox (i. e. an outgoing message will take up
+//!           only 1 outbox of the JTAG mailboxes)
+//!        - \b SYSCTL_JTAGMBSIZE_32BIT - the JTAG messages will be contained
+//!           within both JTAG mailboxes (i. e. an outgoing message will take
+//!           up both Outboxes of the JTAG mailboxes)
+//!        \n Modified bits are \b JMBMODE of \b SYSJMBC register.
+//! \param autoClearInboxFlagSelect decides how the JTAG inbox flags should be
+//!        cleared, whether automatically after the corresponding outbox has
+//!        been written to, or manually by software.
+//!        Valid values are:
+//!        - \b SYSCTL_JTAGINBOX0AUTO_JTAGINBOX1AUTO [Default] - both JTAG
+//!           inbox flags will be reset automatically when the corresponding
+//!           inbox is read from.
+//!        - \b SYSCTL_JTAGINBOX0AUTO_JTAGINBOX1SW - only JTAG inbox 0 flag is
+//!           reset automatically, while JTAG inbox 1 is reset with the
+//!        - \b SYSCTL_JTAGINBOX0SW_JTAGINBOX1AUTO - only JTAG inbox 1 flag is
+//!           reset automatically, while JTAG inbox 0 is reset with the
+//!        - \b SYSCTL_JTAGINBOX0SW_JTAGINBOX1SW - both JTAG inbox flags will
+//!           need to be reset manually by the
+//!        \n Modified bits are \b JMBCLR0OFF and \b JMBCLR1OFF of \b SYSJMBC
+//!        register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void SysCtl_initJTAGMailbox(uint8_t mailboxSizeSelect,
+                                   uint8_t autoClearInboxFlagSelect);
+
+//*****************************************************************************
+//
+//! \brief Returns the status of the selected JTAG Mailbox flags.
+//!
+//! This function will return the status of the selected JTAG Mailbox flags in
+//! bit mask format matching that passed into the mailboxFlagMask parameter.
+//!
+//! \param mailboxFlagMask is the bit mask of JTAG mailbox flags that the
+//!        status of should be returned.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b SYSCTL_JTAGOUTBOX_FLAG0 - flag for JTAG outbox 0
+//!        - \b SYSCTL_JTAGOUTBOX_FLAG1 - flag for JTAG outbox 1
+//!        - \b SYSCTL_JTAGINBOX_FLAG0 - flag for JTAG inbox 0
+//!        - \b SYSCTL_JTAGINBOX_FLAG1 - flag for JTAG inbox 1
+//!
+//! \return A bit mask of the status of the selected mailbox flags.
+//
+//*****************************************************************************
+extern uint8_t SysCtl_getJTAGMailboxFlagStatus(uint8_t mailboxFlagMask);
+
+//*****************************************************************************
+//
+//! \brief Clears the status of the selected JTAG Mailbox flags.
+//!
+//! This function clears the selected JTAG Mailbox flags.
+//!
+//! \param mailboxFlagMask is the bit mask of JTAG mailbox flags that the
+//!        status of should be cleared.
+//!        Mask value is the logical OR of any of the following:
+//!        - \b SYSCTL_JTAGOUTBOX_FLAG0 - flag for JTAG outbox 0
+//!        - \b SYSCTL_JTAGOUTBOX_FLAG1 - flag for JTAG outbox 1
+//!        - \b SYSCTL_JTAGINBOX_FLAG0 - flag for JTAG inbox 0
+//!        - \b SYSCTL_JTAGINBOX_FLAG1 - flag for JTAG inbox 1
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void SysCtl_clearJTAGMailboxFlagStatus(uint8_t mailboxFlagMask);
+
+//*****************************************************************************
+//
+//! \brief Returns the contents of the selected JTAG Inbox in a 16 bit format.
+//!
+//! This function returns the message contents of the selected JTAG inbox. If
+//! the auto clear settings for the Inbox flags were set, then using this
+//! function will automatically clear the corresponding JTAG inbox flag.
+//!
+//! \param inboxSelect is the chosen JTAG inbox that the contents of should be
+//!        returned
+//!        Valid values are:
+//!        - \b SYSCTL_JTAGINBOX_0 - return contents of JTAG inbox 0
+//!        - \b SYSCTL_JTAGINBOX_1 - return contents of JTAG inbox 1
+//!
+//! \return The contents of the selected JTAG inbox in a 16 bit format.
+//
+//*****************************************************************************
+extern uint16_t SysCtl_getJTAGInboxMessage16Bit(uint8_t inboxSelect);
+
+//*****************************************************************************
+//
+//! \brief Returns the contents of JTAG Inboxes in a 32 bit format.
+//!
+//! This function returns the message contents of both JTAG inboxes in a 32 bit
+//! format. This function should be used if 32-bit messaging has been set in
+//! the SYS_initJTAGMailbox() function. If the auto clear settings for the
+//! Inbox flags were set, then using this function will automatically clear
+//! both JTAG inbox flags.
+//!
+//!
+//! \return The contents of both JTAG messages in a 32 bit format.
+//
+//*****************************************************************************
+extern uint32_t SysCtl_getJTAGInboxMessage32Bit(void);
+
+//*****************************************************************************
+//
+//! \brief Sets a 16 bit outgoing message in to the selected JTAG Outbox.
+//!
+//! This function sets the outgoing message in the selected JTAG outbox. The
+//! corresponding JTAG outbox flag is cleared after this function, and set
+//! after the JTAG has read the message.
+//!
+//! \param outboxSelect is the chosen JTAG outbox that the message should be
+//!        set it.
+//!        Valid values are:
+//!        - \b SYSCTL_JTAGOUTBOX_0 - set the contents of JTAG outbox 0
+//!        - \b SYSCTL_JTAGOUTBOX_1 - set the contents of JTAG outbox 1
+//! \param outgoingMessage is the message to send to the JTAG.
+//!        \n Modified bits are \b MSGHI and \b MSGLO of \b SYSJMBOx register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void SysCtl_setJTAGOutgoingMessage16Bit(uint8_t outboxSelect,
+                                               uint16_t outgoingMessage);
+
+//*****************************************************************************
+//
+//! \brief Sets a 32 bit message in to both JTAG Outboxes.
+//!
+//! This function sets the 32-bit outgoing message in both JTAG outboxes. The
+//! JTAG outbox flags are cleared after this function, and set after the JTAG
+//! has read the message.
+//!
+//! \param outgoingMessage is the message to send to the JTAG.
+//!        \n Modified bits are \b MSGHI and \b MSGLO of \b SYSJMBOx register.
+//!
+//! \return None
+//
+//*****************************************************************************
+extern void SysCtl_setJTAGOutgoingMessage32Bit(uint32_t outgoingMessage);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+#endif // __MSP430WARE_SYSCTL_H__